Powerware ConnectUPS X Manual do Utilizador descarregar pdf (Página 18)

Local Configuration

ConnectUPS Web/SNMP Card (X and BD Models) User’s Guide : Rev A www.powerware.com

3. Change any other options as needed for your

particular configuration by typing the corresponding

number shown in the menu (

2 through 10). Each

setting is described in the following sections.

4. Type

0 to return to the Main Menu.

5. Type

0 to exit the ConnectUPS Web/SNMP Card

configuration. The ConnectUPS Web/SNMP Card

automatically saves all settings after exiting the

configuration function (see Figure 7).

NOTE The ConnectUPS Web/SNMP Card may take up to two minutes to

establish communication with the UPS. Please wait before attempting

communication with the card from a Web browser or network management

system (NMS).

NOTE

Telnet Operation – Once the card is reachable on the network, you

can use a Telnet utility to adjust any of the configuration settings. The

menus are identical to those seen during serial configuration and are

password-protected for Superuser access only.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 41 42

Sem comentários

Powerware ConnectUPS X Manual do Utilizador Página 18