Powerware Ferrups FE/QFE UPS Manual do Utilizador descarregar pdf (Página 48)

Communication

Powerware

FERRUPS FE/QFE UPS (500 VA–18 kVA) User’s Guide : Rev A www.powerware.com

Figure 10. DB-9 to UPS Pinout

Figure 11. DB-25 to UPS Pinout

2. Connect the cable from the RS-232 port on the back of the UPS

to the serial port on your terminal or computer.

3. Your terminal or computer should be set to: 1200 baud, 8 bits,

No parity, 1 stop bit, and full duplex.

The terminal or terminal emulation software should also be set

to full duplex. If you are using a terminal, note that the

FERRUPS UPS supports the Televideo

900 series, ADM3A and

WYSE

50 emulation.

Table 6 shows the standard settings at the UPS DB-25S port and

the settings that can be adjusted. Call your service

representative if you need to adjust any of the settings.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 71 72

Sem comentários

Powerware Ferrups FE/QFE UPS Manual do Utilizador Página 48